LASER ENGRAVING - INDUSTRIAL CUSTOM PRODUCTION

• Versatile Engraving Services: They offer engraving on various materials such as stainless steel, anodized aluminum, powder-coated metal parts, plastics, wood, leather, and glass.

• High-Quality and Precision: Systana emphasizes the quality and precision of their engravings, suitable for a wide range of industrial applications, including equipment identification, safety warnings, and custom stainless steel plates.

• Technology and Equipment: The company utilizes CO2 and fiber laser engraving machines, ensuring high-quality outcomes for both small and large quantities.

• Experienced and Custom Solutions: With over 15 years in the industry, they provide personalized solutions to meet specific customer needs.

Materials that Can be Laser Engraved with laser technology

• Stainless Steel

• Anodized Aluminum

• Powder Coated Metal Parts

• Industrial engraveable Rowmark Plastic

• Wood

• Leather

• Glass

Wood and natural engraveable materials

The laser engraving of natural products like wood, wood plaque, wood-cutting board is based upon product carbonization which produces dimming or darkening of the surface as well as marks with high contrast. Straight "etching" of pictures, image and text on wood were a few of the initial usages of engraving lasers.

The laser power required right here is usually much less than 30 watts relying on the laser to be used, as a lot of them varies. Woods like walnut, maple and also mahogany create good results with our laser machines.

Softwoods can be carefully etched, however, often tend to vaporize a little more. Softwood needs the most lowest power levels as well as enables the fastest cut speeds, while active cooling (e.g., a fan with adequate airflow) prevents ignition. Fur is not engravable; finished natural leathers though can be laser-engraved with an appearance really similar to hot-stamping. Certain latex rubber compounds can be laser engraved; as an example these can be made use of to produce inking stamps.

Paper concealing tape is sometimes used as a pre-engraving topcoat on completed and also resiny timbers so that cleaning refers selecting the tape off and also out of the unengraved areas, which is easier than getting rid of the sticky and smoky surround "halos" (and calls for no varnish-removing chemicals).

Plastics

Each plastic has particular and specific product properties, particularly the light absorption range. The laser irradiation can generate direct chemical adjustments, melting or dissipation of the material.

Plastics are hardly ever seen in their pure state due to the fact that numerous additives are used such as colourants, ultraviolet resistant, release agents, and so on. These ingredients impact the result of laser noting. For signs as well as face plates, and so on, special laser-marked plastics were established. At Systana laser Engraving, we only use first quality, two layers laser engravable Rowmark Plastics.

Other plastics might be successfully etched, but organized testing on a sample piece is suggested.

Metals

Metals are warm resistant materials, marking metals needs high-density laser irradiation. Basically, the ordinary laser power causes melting as well as the peak power triggers dissipation of the metal materials.

The very best traditional engraving products started being the worst laser-engraveable materials. This problem has currently been resolved using lasers at shorter wavelengths than the standard wavelength carbon dioxide laser. Using Yb: Fiber Lasers, Nd: YVO4 or Nd: YAG lasers steels can now conveniently be inscribed utilizing our commercial systems in our production facilities.

Coated Metals

The same transmission that functions versus the spot vaporization of steel is an asset if the goal is to vaporize a few other coatings away from the metal. Laser engraving metal plates are made with a carefully brightened metal, covered with an enamel paint made to be "burnt". At levels of 10 to 30 watts, excellent engravings are made as the enamel is gotten rid of fairly cleanly. Much laser inscription is marketed as revealed brass or silver-coated steel lettering on a black or dark-enamelled background.

Anodized light weight aluminum is commonly etched or engraved with CO2 laser machines. With power much less than 40 W this metal can easily be engraved with clean, impressive information. The laser bleaches the colour exposing the white or silver light weight aluminum substrate. Although it is available in numerous shades, laser engraving black anodized aluminum provides the best contrast of all shades.

Spray coverings can be obtained for the particular use of laser etching steels, these sprays use a coating that is visible to the laser light which merges the layer to the substrate where the laser passed over.

Materials that cannot be laser engraved

• All Carbon fibers materials (Carbon)

• Polyvinyl chloride (PVC)

• Polyvinyl butyrate (PVB)

• Polytetrafluoroethylenes (PTFE /Teflon)

• Beryllium oxide

• Any materials containing halogens (fluorine, chlorine, bromine, iodine and astatine), epoxy or phenolic resins

FAQ about Laser Engraving

Can laser machines engrave in colour?

On metals and wood, there is a possibility of different grades of black or white tint, but it is not coloured in itself. If you require colours, we suggest using the coloured Rowmark industrial plastic.

Does laser engraving fade over time?

Laser engraved plaque is very resistant over time. Of course, nothing is fully permanent, but you can be assured that our laser engraved products will stay sharp for decades. It always depends on the surrounding conditions that occurs and affect the plaque itself.

Can Laser Engrave Glass

Yes! And it does a great job! At Systana, we laser engrave glass, but only for flat plaques. We do not product any glass mugs, wineglass or non flat glass objects.

Can Laser Engraver Cut Metal

No, our machines are not powerful enough to cut metal, only laser engrave, marks or etch on its surface. In comparison, a laser-cutting machine, can cut metals, but cannot laser engrave it with patterns, text or images.

Is Laser Engraving Permanent

Oh yes! If we compare with other technologies like digital printing, regular printing or stickers, our laser engraved products will be permanently useful!

How much does it cost to get something Laser Engraved

It always depends on the material that will be used, the size of the plaque, the thickness of it and on the top of all, what will be laser marked on it. In order to get a price, please ask us for a free quote and we’ll be pleased to give you the exact price.

The Benefits of Laser Engraving for Your Business

When it comes to industrial laser engraving services, you want quality, speed, and professionalism. Luckily, our team at Systana Laser Engraving, delivers on all three fronts! We understand the benefits of laser engraving for your business and are committed to providing the best possible services.

Our experienced industrial laser engravers are some of the best in the business, and we're confident that we can provide you with the high-quality results you need. Contact us today to learn more about our services or to request a free quote!

Quality industrial laser engraving : A precise and permanent way to mark your products

If you're looking for a precise and permanent way to mark your products, industrial laser engraving is the way to go. At Systana Laser Engraving, we offer fast, professional engraving services that will meet your needs and exceed your expectations.

Our state-of-the-art laser equipment and experienced team, can handle even the most challenging projects quickly and efficiently. We're proud to be one of the best industrial laser engravers in Canada, and we're committed to providing our clients with the highest quality products and services available.

Canada’s Leader in Industrial Laser Engraving

At Systana Laser Engraving, we specialize in high-quality industrial laser engraving. Our CO2 and Fibre laser engraving systems are the most precise in the industry, able to produce nameplates, control boards, and other plates with intricate designs and small font sizes, without compromising on quality or sharpness.

We engrave on a variety of materials, including plastic, aluminum, stainless steel, wood, and leather. Each of our engravings is cleaned and checked by hand to ensure accuracy, and our packaging process guarantees a perfect product every time. We are the leading laser engraving company in Quebec and a major player in Canada, in terms of both daily production capacity and prices, due to our large volume of laser-engravable material purchases and the quantity of laser machine we possess.

Our team of experienced professionals can develop innovative solutions for the industrial signage of your equipment and products. Take advantage of our more than 15 years of experience in the laser industry and our cutting-edge technology today! Systana Laser Engraving offers innovative industrial laser engraving services for equipment and product signage.

Industrial laser engraving is a process that uses a laser to mark directly on materials to create an image or text. The laser beam is directed at the surface of the workpiece and the material is engraved or marked by the heat of the laser. Laser engraving is a popular choice for industrial applications because it is a fast and accurate way to produce high-quality engravings.

Let us Mark You!